HJEM

YDELSER

PRODUKTER

Pressure Gauge (manometer) & Seals

The manometer sold by Automatik Service Hornsyld are the Swedish quality, earlier sold as NAF / Nordarmatur, SattControl & Alfa/Laval.

Bourdon tubes are circular-shaped tubes with an oval cross-section. The pressure of the media acts on the inside of this tube, which results in the oval cross section (1) becoming almost round. Because of the curvature of the tube ring, the bourdon tube bends when tension occurs. The end of the tube (3), which is not fixed, moves, thus being a measurement for the pressure. A pointer (7) indicates this movement. Bourdon tubes bent at an angle of approx. 250° are used for pressures up to approx. 60 bar.

For higher pressure, Bourdon tubes are used which have a number of superimposed coils of the same diameter (i.e. helical coils) or helical-shaped coils (i.e. helical springs) at one level. Bourdon tubes can only be protected against overload to a limited extent. For particularly difficult measuring operations, the pressure gauge can be provided with a chemical seal as a separation or protection system.

The pressure ranges are between 0...0.6 and 0...4000 bar .

Pressure seals

Pressure seals enable pressure gauges to be used with corrosive and viscous media. They can be used to measure both pressure and vacuum.

Pressure Gauges

Pressure Gauge, MIP serie

MIP22	Features Accuracy class 1.0. Can be loaded up to 100% under steady working pressure Alternatively mountings - covering most media long operational life time and high reliability due to specially treated spring material and robust stainless steel mechanism Disengagement protection as standard
MIP10	Features Accuracy class 1.0. Can be loaded up to 100% under steady working pressure Alternatively mountings - covering most media long operational life time and high reliability due to specially treated spring material and robust stainless steel mechanism Disengagement protection as standard
MIP20	Features Accuracy class 1.0. Can be loaded up to 100% under steady working pressure Alternatively mountings - covering most media long operational life time and high reliability due to specially treated spring material and robust stainless steel mechanism Disengagement protection as standard

Pressure Seals MWP10